OEM Vitamin & Mineral Drink Powder Manufacturer Malaysia | Halal Multivitamin
Halal OEM manufacturing of vitamin and mineral drink powders in Perak, Malaysia — multivitamin, effervescent vitamin C, B-complex and mineral blends produced under your own brand.
Product Range
- Multi Vitamin Energy Drink
- Multivitamin Drink Powder
- Vitamin C Effervescent Powder
- B-Complex Drink Powder
- Calcium & Magnesium Powder
- Iron Supplement Drink
- Zinc Drink Powder
What is vitamin and mineral drink powder and who buys it?
Vitamin and mineral powders deliver a defined micronutrient profile as a drink rather than a tablet. They are bought by family and pharmacy brands, and by brands whose consumers dislike swallowing tablets — children and older adults in particular.
The drink format is the whole proposition here. Malaysian consumers have plenty of tablet options; a well-flavoured effervescent or sachet vitamin is bought because it is pleasant to take, which drives far better daily compliance.
It is also the most straightforward family to build a multi-SKU range from, since a single base can be adapted into children's, adult, and senior-specific versions with dose and flavour changes.
What pack formats does vitamin and mineral drink powder come in?
Single-serve sachets and stick packs for retail and sampling, jars and tubs for multi-serve, and bulk for brands doing their own downstream packing.
| Format | Typical use |
|---|---|
| Sachet / stick pack | Single serve, retail multi-packs, sampling |
| Jar or tub | Multi-serve home use, gifting, subscription refills |
| Bulk (kg bags / drums) | Brands doing their own downstream filling, food service |
Fill weight, sachet material and shelf-life target are decided together, because they affect each other, and the minimum order quantity depends on which combination you choose.
What matters when formulating vitamin and mineral drink powder?
Micronutrient formulation is a precision exercise. Inclusion levels are small, overages are needed to hold label claims through shelf life, and several vitamins are actively hostile to each other in the same blend.
- Micronutrient premix design — the profile is defined first, then the flavour system is built around it.
- Overage — vitamins degrade over shelf life, so they are dosed above label claim at production so the claim still holds at expiry.
- Interaction — some vitamins and minerals destabilise each other and need separation or protection within the blend.
- Blend uniformity — with very small inclusion levels, consistent distribution across every sachet is a genuine production challenge.
- Taste of the actives — B vitamins are bitter, iron is metallic, zinc lingers. Flavour is built to cover the specific profile.
- Effervescent option — popular and differentiating, but moisture control becomes considerably more demanding.
What kinds of vitamin and mineral drink powder can you produce?
The range splits into a few distinct directions. Which one you pick drives the formulation, the price point and the buyer more than the individual flavour does.
| Direction | What sits in it | Who it suits |
|---|---|---|
| Multivitamin | Broad-spectrum vitamin and mineral profiles | Family and everyday wellness |
| Effervescent vitamin C | High-dose vitamin C, often with zinc | The most popular single-nutrient format |
| Targeted single nutrients | B-complex, iron, calcium, vitamin D | Pharmacy and specific-need positioning |
How is vitamin and mineral drink powder manufactured?
Production runs in five stages: raw material intake and checks, dry blending, granulation or agglomeration where the product needs it, filling into the chosen pack, then finished-goods checks before release.
| Stage | What happens | Why it matters to your product |
|---|---|---|
| Raw material intake | Incoming ingredients are checked and their Halal status and documentation verified | A Halal-certified finished product depends on every input being traced, not just the recipe |
| Dry blending | Base powder, creamer, sugar, flavours and actives are weighed and blended to a uniform mix | Blend uniformity decides whether every sachet tastes the same |
| Granulation / agglomeration | Fine particles are bound into larger porous granules | This is what makes a powder sink and dissolve instead of floating and clumping |
| Filling & sealing | Powder is filled to weight into sachets, jars or bulk packs and sealed | Fill weight accuracy and seal integrity drive both cost and shelf life |
| Finished-goods checks | Weight, moisture, appearance, dissolving behaviour and taste are checked before release | Catches the batch that looks fine but will not dissolve in the customer's cup |
Who is vitamin and mineral drink powder usually made for?
Brand owners selling through social commerce and agent networks, health and pharmacy retail, food-service and horeca supply, and exporters who need a Halal-certified origin.
| Channel | What the product usually looks like |
|---|---|
| Pharmacy and family retail | Multi-SKU vitamin ranges |
| Social commerce | Effervescent tubes and sachet boxes |
| Children's brands | Lower dose, fruit flavoured |
| Senior nutrition | Easy-to-take drink format instead of tablets |
| Export | Halal-certified vitamin drinks |
What shelf life can vitamin and mineral drink powder achieve, and what shortens it?
Shelf life is set by moisture, oxygen, light and heat — in roughly that order for powders. The packaging usually matters as much as the formula, because a good powder in a weak barrier will still harden or go stale.
- Moisture pickup — the main enemy. Sugar and acid both attract water, and a powder that absorbs it will cake into a solid block.
- Active potency decline — actives lose strength over shelf life, so the label claim has to still hold at expiry, not only at production.
- Light exposure — natural colours and matcha fade in clear packaging long before the product is unsafe.
In practice this means a foil or metallised laminate for sachets, a good induction seal on jars, and a desiccant where the formula is especially hygroscopic. Clear packaging looks attractive and costs shelf life.
Declared shelf life is confirmed by stability testing on the actual formula in the actual pack, not estimated from the recipe.
How do I start an OEM order for vitamin and mineral drink powder?
Send a brief: the taste or effect you want, target retail price, pack format and rough monthly volume. A reference sample helps more than anything else. From there the sequence is quotation, bench sample, revision, pilot run, then production.
- 1. Brief — what it should taste like, who buys it, target price, format
- 2. Quotation — indicative costing against that brief
- 3. Sample — bench sample for you to taste and revise
- 4. Pilot — a small run to confirm the formula behaves on the line
- 5. Production — full run, packed to your artwork
The first bench sample is free, made to your brief rather than pulled from a shelf. Timelines depend on ingredient lead times and the complexity of the formula, and are confirmed with your quotation.
Where is this manufactured, and under what certification?
At D&O Nutraceutical Manufacturing Sdn. Bhd. in Lahat, Perak, Malaysia — six factory units certified Halal by JAKIM (MS 1500), GMP to MS 1514:2022 (SIRIM QAS, cert. GMP 00203), HACCP to MS 1480:2019 (SIRIM QAS, cert. HACCP 00425), ISO 22000 (SIRIM QAS, cert. FSMS 00229) and MeSTI (Ministry of Health, cert. ME0523069-0/1).
The plant is outside Ipoh, between Kuala Lumpur and Penang, with road access to both Port Klang and Penang Port for export. Four units are used for production and two for packing and assembly, 4,000 sq ft each.
D&O is the powder functional food manufacturer of ORIZI Group. Liquid and ready-to-drink formats are made by Nutrizens Wellness Sdn. Bhd.; cosmetics, skincare and personal care by Dr Orizi; medical devices by Skyler and Imedify.
Certificates and their certified scope are supplied on request. JAKIM Halal certification is verifiable in the MYeHALAL directory, MeSTI in the Ministry of Health FoSIM system, and the GMP, HACCP and ISO 22000 certificates with SIRIM QAS International. The MS standards themselves are published by Standards Malaysia, and ISO 22000 by ISO.
Frequently asked questions
- Why dose vitamins above the label claim?
- Because vitamins lose potency over shelf life. The overage is calculated so the declared amount is still present at the end of the stated shelf life.
- Can all vitamins and minerals go in one blend?
- Not always. Some destabilise each other, so the premix has to be designed with those interactions in mind rather than simply combining everything.
- Is an effervescent format possible?
- Yes, and it sells well. It does require tighter humidity control in production and a more protective pack.
- What health claims can we print on the pack?
- Health and functional claims on supplements in Malaysia are regulated, and what is permitted depends on the ingredient, the dose and the exact wording. This should be settled with the relevant authority before artwork is finalised — changing packaging after a rejection is far more expensive than checking first.
Get a Free Sample of Your Own Product
Tell us what you want to make — the taste or effect, your target retail price, the pack format and rough monthly volume. We come back with a costing and a free bench sample made to your brief, not a stock product. Halal OEM manufacturing in Perak, Malaysia, in sachet, stick pack, jar or bulk.
JAKIM Halal · GMP MS 1514 · HACCP MS 1480 · ISO 22000 · MeSTI certified